# @skateskinsofficial on TikTok

- **Type:** Video
- **Original URL:** https://www.tiktok.com/@skateskinsofficial/video/7337447042110786858
- **Gondola URL:** https://gondola.cc/posts/22984517-skateskinsofficial-tiktok
- **Thumbnail:** https://img.gondola.cc/tr:w-,h-,fo-auto/postThumbnails/d0314afecb.jpg
- **Posted:** 2024-02-19T22:42:26.000+00:00
- **Account Owner:** Nick Ciavarella (@716nick) — https://gondola.cc/716nick

## Caption

Replying to @toni #SkateSkins Install Instructions: - Make sure skates are cool & dry. - Starting with the back of the skate, peel off the adhesive backer. - Line the bottom, middle of the SkateSkins up with the heel cap on back of skate. - If no heel cap, start about 2" from the bottom of the skate, in the back. - Carefully start to install the sides to the skate. - If SkateSkins need to be repositioned, (refer to removal instructions). - Install higher or lower on the heel cap and repeat install steps. - Once fit is good, firmly bond all areas of the SkateSkins to the skate by hand. - DO NOT use heat on SkateSkins or bake skates with SkateSkins on. - Ensure all edges are properly sealed to avoid any lifting. No wait time needed. #SkateSkins Removal Instructions: - SkateSkins should always be removed from the front. - Removing from the top could cause damage to the skins. - IMPORTANT: Grab the toothpick (from the bottom of the packaging). - Use the toothpick to get fully under the front corner of the SkateSkins. - Make sure there is enough area peeled up with the toothpick to start removal. - Once fully underneath, pull the SkateSkins away from the skate, starting with front. - They can be removed and re-applied to the skate or a new set of skates. - Refer to install instructions. Full info: skateskinsofficial.com

## Stats

- **Views:** 401,600
- **Likes:** 21,800
- **Shares:** 1,130
- **Comments:** 361

## Credits

No public credits are recorded here. This does not identify who made the post.

## Tags

skateskins

---
Copyright (c) Gondola