#TeamToyota Part 2 of my low compression saga in the #EastCoastCar! The -6 Y-Block I made that routed back to the oil tank did nothing to help relieve the crankcase pressure… So after talking with some friends I vented the valve covers with -12 411.works weld bungs and made my first catch can to vent it externally. Big thanks to corymisko of freshproducemfg who helped me with the baffling design. A ton of little mistakes on the tank but was a fun process as I don’t have a ton of sheet metal experience. The new setup vents enough to where we are only seeing 1.5 PSI of pressure in the engine 🤘🏼 Also this is just a temporary fix as the location and line routing is less than ideal over the exhaust 💪🏼 📷 zach.jopson #RT411 #86 #2JZ #Drifting #Mobil1 #ToyotaRacing #ToyotaPartner #NASCAR #411WORKS 411.works rockstarenergy tgr_na mobil1 mobil1racing st_suspensions supertechperformance race.service garrettmotion _wisefab_ motecusa johnreedracing hartsock_motorsports kineticmotorwor...