Have you tried this method? There are other ways you could cut this plywood to meet the floor nicely for an interior ramp. This, however, was the easiest and fastest for me. 5 degree bevel and Rip on the edge. I would not recommend it for everyone or someone new to the trades. There are a few moments when executing this cut that you need to be conscious of. When the front of the shoe passes the end of the plywood. The blade will try to pull the saw down into the wood. To compensate and essentially float the front of the saw, you need to apply down pressure to the back of the shoe. @bigdogconstruction.gm . . . . . #carpenter #carpentry #circularsaw #powertools #woodworking #tradesman #trades #woodworker #plywood #toolbelt